AvagoADNS-3050入门级游戏光导航传感器解决方案
2011-07-25
作者:Avago公司
</a>LED" title="LED">LED" title="LED">LED驱动器和振荡器,四线串行接口,无源元件熟最少.主要用在有线和无线光学游戏鼠标和跟踪球,综合输入设备和以电池为能源的输入设备.本文介绍了ADNS-3050主要特性, 光学鼠标框图, 2D装配图和装配分解图,以及有线和无线解决方案电路图.
ADNS-3050: Entry-level Gaming Optical Navigation Sensor
The Avago Technologies ADNS-3050 is a small form factor entry-level gaming optical navigation sensor. It is housed in an 8-pin staggered dual in-line package (DIP). It is capable of high-speed motion detection typically at 60ips and acceleration up to 20g; suitable for both wired and wireless gaming navigation system. The low power management in wireless mode can be customized to suit user preferences. In addition, it has an on-chip oscillator and LED driver to minimize external components.
The ADNS-3050 sensor along with the ADNS-5110-001 lens, ADNS-5200 clip, and HLMP-EG3E red LED forms a complete and compact mouse tracking system. There are no moving parts, which translates to high reliability and less maintenance for the end user. Precision optical alignment is not required, thus facilitating high volume assembly.
Theory of Operation
The ADNS-3050 is based on Optical Navigation Technology, which measures changes in position by optically acquiring sequential surface images (frames) and mathematically determining the direction and magnitude of movement. The ADNS-3050 contains an Image Acquisition System (IAS), a Digital Signal Processor (DSP), and a four wire serial port. The IAS acquires microscopic surface images via the lens and illumination system. These images are processed by the DSP to determine the direction and distance of motion. The DSP calculates the ΔX and Δy relative displacement values. An external microcontroller reads and translates the ΔX and Δy information from the sensor serial port into PS2, USB, or RF signals before sending them to the host PC.
ADNS-3050主要特性:
Small Form Factor Package - 8-pin DIP
Operating Voltage: 2.8V-3.0V
High Speed Motion Detection at typical of 60ips and acceleration up to 20g.
Selectable Resolutions up to 2000cpi
Four wire Serial Port Interface
External Interrupt Output for Motion Detection
Internal Oscillator — no clock input needed
On-chip LED driver
Minimal number of passive components
Programmable power-saving modes for selectable wired or wireless application
Customizable response time and downshift time for rest modes
Confi gurable LED operating modes and drive current
ADNS-3050应用:
Wired and Wireless Optical gaming mice and trackballs
Integrated input devices
Battery-powered input devices
图1.ADNS-3050 2D装配图(顶和侧视图)
图2.ADNS-3050 装配分解图
图3.ADNS-3050 光学鼠标框图
图4.ADNS-3050和带 HLMP-EG3E 红光LED MCU接口的有线解决方案电路图
图4.ADNS-3050和带 HLMP-EG3E 红光LED MCU接口的无线解决方案电路图
详情请见:
http://www.avagotech.com/docs/AV02-2886E
ADNS-3050: Entry-level Gaming Optical Navigation Sensor
The Avago Technologies ADNS-3050 is a small form factor entry-level gaming optical navigation sensor. It is housed in an 8-pin staggered dual in-line package (DIP). It is capable of high-speed motion detection typically at 60ips and acceleration up to 20g; suitable for both wired and wireless gaming navigation system. The low power management in wireless mode can be customized to suit user preferences. In addition, it has an on-chip oscillator and LED driver to minimize external components.
The ADNS-3050 sensor along with the ADNS-5110-001 lens, ADNS-5200 clip, and HLMP-EG3E red LED forms a complete and compact mouse tracking system. There are no moving parts, which translates to high reliability and less maintenance for the end user. Precision optical alignment is not required, thus facilitating high volume assembly.
Theory of Operation
The ADNS-3050 is based on Optical Navigation Technology, which measures changes in position by optically acquiring sequential surface images (frames) and mathematically determining the direction and magnitude of movement. The ADNS-3050 contains an Image Acquisition System (IAS), a Digital Signal Processor (DSP), and a four wire serial port. The IAS acquires microscopic surface images via the lens and illumination system. These images are processed by the DSP to determine the direction and distance of motion. The DSP calculates the ΔX and Δy relative displacement values. An external microcontroller reads and translates the ΔX and Δy information from the sensor serial port into PS2, USB, or RF signals before sending them to the host PC.
ADNS-3050主要特性:
Small Form Factor Package - 8-pin DIP
Operating Voltage: 2.8V-3.0V
High Speed Motion Detection at typical of 60ips and acceleration up to 20g.
Selectable Resolutions up to 2000cpi
Four wire Serial Port Interface
External Interrupt Output for Motion Detection
Internal Oscillator — no clock input needed
On-chip LED driver
Minimal number of passive components
Programmable power-saving modes for selectable wired or wireless application
Customizable response time and downshift time for rest modes
Confi gurable LED operating modes and drive current
ADNS-3050应用:
Wired and Wireless Optical gaming mice and trackballs
Integrated input devices
Battery-powered input devices
图1.ADNS-3050 2D装配图(顶和侧视图)
图2.ADNS-3050 装配分解图
图3.ADNS-3050 光学鼠标框图
图4.ADNS-3050和带 HLMP-EG3E 红光LED MCU接口的有线解决方案电路图
图4.ADNS-3050和带 HLMP-EG3E 红光LED MCU接口的无线解决方案电路图
详情请见:
http://www.avagotech.com/docs/AV02-2886E
本站内容除特别声明的原创文章之外,转载内容只为传递更多信息,并不代表本网站赞同其观点。转载的所有的文章、图片、音/视频文件等资料的版权归版权所有权人所有。本站采用的非本站原创文章及图片等内容无法一一联系确认版权者。如涉及作品内容、版权和其它问题,请及时通过电子邮件或电话通知我们,以便迅速采取适当措施,避免给双方造成不必要的经济损失。联系电话:010-82306118;邮箱:aet@chinaaet.com。