《电子技术应用》
您所在的位置:首页 > 微波|射频 > 设计应用 > L波段射频数字化宽带接收解调研究
L波段射频数字化宽带接收解调研究
2021年电子技术应用第5期
唐 博,李 璐
四川九洲空管科技有限责任公司,四川 绵阳621000
摘要: L波段电磁波频率在1 GHz~2 GHz范围内,普遍运用于雷达、通信和导航领域。利用射频数字化接收解调技术,设计了一种L波段宽频带、高动态射频数字化接收机。主要从射频采样、数字信道分离、接收机动态扩展以及高速信号解调方面,对L波段射频数字化通用接收机的设计进行了研究,并结合FPGA信号处理平台给出了数字通道分离和滤波解调的具体实现方案。
中图分类号: TN859
文献标识码: A
DOI:10.16157/j.issn.0258-7998.201004
中文引用格式: 唐博,李璐. L波段射频数字化宽带接收解调研究[J].电子技术应用,2021,47(5):131-134.
英文引用格式: Tang Bo,Li Lu. Research on L-band wideband RF digital receiver and demodulator[J]. Application of Electronic Technique,2021,47(5):131-134.
Research on L-band wideband RF digital receiver and demodulator
Tang Bo,Li Lu
Sichuan Jiuzhou Aerocontrol Co.,Ltd.,Mianyang 621000,China
Abstract: L-band radio frequency is in the range of 1 GHz~2 GHz,which is widely used in rader, communication and navigation. The main research content of this paper is to design an L-band broadband, high dynamic RF digital receiver using RF digital receiver demodulation technology. In this paper, the design of L-band RF digital receiver is research at RF sampling, digital channel separation, receiver dynamic expansion and high-speed signal demodulation, and give a specific implement scheme of digital channel separation, high-speed signal demodulation based on FPGA digital signal process platform.
Key words : RF digital sampling;band pass sampling;multi-phase filter;FPGA digital signal process

0 引言

    射频数字化是指天线接收到的射频信号只经过限幅、滤波、放大,直接进入高速AD采样,极大减少了接收机的硬件复杂度、降低了模拟器件噪声、温度漂移及器件个体差异对接收信号的影响。射频数字化接收解调是指射频采样后的数据在数字领域进行解调,解调频率、方式用程序实现,修改灵活方便,是软件无线重要的解决方案[1]

    射频数字化接收解调的概念提出较早,但由于AD采样频率及后端信号处理器性能的限制,一直无法真正实现。随着集成电路的行业的发展,高速AD芯片的采样频率上升至数吉每秒,这为射频数字化采样提供了硬件支持;新一代的FPGA芯片集成了丰富的乘法器资源、逻辑资源、丰富的信号处理IP,加之高度并行的处理方式,为射频采样后信号的高速解调提供高性能处理平台。




本文详细内容请下载:http://www.chinaaet.com/resource/share/2000003538




作者信息:

唐  博,李  璐

(四川九洲空管科技有限责任公司,四川 绵阳621000)

此内容为AET网站原创,未经授权禁止转载。