《电子技术应用》
您所在的位置:首页 > 通信与网络 > 设计应用 > 基于无线通信的智能家居设计
基于无线通信的智能家居设计
2021年电子技术应用第9期
邓怀俊,柳琳娜,张忠禺,史世阳
中原工学院 电子信息学院,河南 郑州451191
摘要: 随着科技的迅速发展以及物联网时代的到来,人们对居住的环境也有了更高要求,智能家居技术日新月异。提出一款结合STM32开发平台和中国移动云平台的无线通信智能家居设计,相比传统智能家居,本设计采用串口、Wi-Fi相结合的方式,摆脱了有线传输的复杂性,通过MATLAB对监控到的数据采用归一化算法分析,用户可通过云平台实时监控传感信息,实现对家庭设备的智能控制。
中图分类号: TN92
文献标识码: A
DOI:10.16157/j.issn.0258-7998.201051
中文引用格式: 邓怀俊,柳琳娜,张忠禺,等. 基于无线通信的智能家居设计[J].电子技术应用,2021,47(9):39-42.
英文引用格式: Deng Huaijun,Liu Linna,Zhang Zhongyu,et al. Intelligent home design based on wireless communication[J]. Application of Electronic Technique,2021,47(9):39-42.
Intelligent home design based on wireless communication
Deng Huaijun,Liu Linna,Zhang Zhongyu,Shi Shiyang
School of Electronic Information,Zhongyuan University of Technology,Zhengzhou 451191,China
Abstract: With the rapid development of technology today and the advent of the Internet of Things era, people have higher requirements for the living environment. Smart homes are changing with each passing day. This paper proposes a wireless communication smart home design combining the STM32 development platform and China Mobile cloud platform. Compared with the traditional smart home, this design uses a combination of serial port and Wi-Fi. It gets rid of the complexity of wired transmission. Using MATLAB to analyze the monitored data by a normalized algorithm, users can monitor sensor information in real time through the cloud platform and realize intelligent control of home equipment.
Key words : smart home;Wi-Fi technology;cloud platform;STM32

0 引言

    随着德国工业4.0的提出,智能化逐渐成为生产方式的主导,物联网、云计算、人工智能的结合为各行各业提供了一种制造方式[1-3]。此外,伴随着我国进入新时代,人们对家庭居住环境的要求也逐渐提高,人们期待一种舒适化、安全化、智能化的家居环境。因此,智能家居在近些年快速发展,并且有了一定的成就,但同时也造成了智能家居系统良莠不齐、无法兼容等问题[4-5]。在物联网技术迅速崛起的今天,智能家居的要求也越来越高,其信息化程度也越来越深,但其最终朝向一定会是为了用户居住的安全与方便两大核心来设计[6]。本文通过中国移动提供的云平台,结合SM32开发平台设计了一款基于云平台的无线智能家居系统[7-9],在智能家居创新领域提出了一种新的探讨方案。




本文详细内容请下载:http://www.chinaaet.com/resource/share/2000003742




作者信息:

邓怀俊,柳琳娜,张忠禺,史世阳

(中原工学院 电子信息学院,河南 郑州451191)




wd.jpg

此内容为AET网站原创,未经授权禁止转载。