《电子技术应用》
您所在的位置:首页 > 微波|射频 > 设计应用 > 超宽带大瞬时带宽可调中频接收机前端技术研究
超宽带大瞬时带宽可调中频接收机前端技术研究
电子技术应用
杨国明,汪家兴
贵州航天计量测试技术研究所
摘要: 为满足对复杂电磁环境的测试和接收机超宽带、大瞬时带宽、小型化、可调等发展需求,基于二级混频的超外差变频技术和多路开关滤波器组,设计了一款具有1.5 GHz~18 GHz超宽带射频信号接收、1 GHz大瞬时带宽、大动态范围和超低接收灵敏度的接收机射频前端模块,且该模块还具有输出中频频率和带宽可选的功能。通过测试对该模块进行了验证,结果符合设计要求。
中图分类号:TN850 文献标志码:A DOI: 10.16157/j.issn.0258-7998.246005
中文引用格式: 杨国明,汪家兴. 超宽带大瞬时带宽可调中频接收机前端技术研究[J]. 电子技术应用,2025,51(7):1-4.
英文引用格式: Yang Guoming,Wang Jiaxing. Research on receiver front end tehnology of ultra-wideband, large instantaneous bandwidth and adjustable intermediate frequency[J]. Application of Electronic Technique,2025,51(7):1-4.
Research on receiver front end tehnology of ultra-wideband,large instantaneous bandwidth and adjustable intermediate frequency
Yang Guoming,Wang Jiaxing
Guizhou Aerospace Institute of Measuring and Testing Technology
Abstract: In order to meet the requirements of complex electromagnetic environment testing and receiver's ultra-wideband, large instantaneous bandwidth, miniaturization and adjustability, this paper designs a receiver RF front-end module with 1.5 GHz~18 GHz ultra-wideband RF signal reception, 1 GHz large instantaneous bandwidth, large dynamic range and ultra-low receiving sensitivity, and it also has the function of outputting intermediate frequency and bandwidth. Through the test, the module is verified and the results meet the design requirements.
Key words : front-end of receiver; ultra-wideband; large instantaneous bandwidth; intermediate frequency; adjustable

引言

随着无线通信技术的飞速发展,电磁环境也越来越复杂,要求接收机具备超宽带接收和大瞬时带宽能力,以实现对接收频率范围内复杂电磁信号的全覆盖实时接收和测试分析。接收机前端作为接收机系统的核心组成部分,对接收机系统的整体结构以及性能起着决定性的作用,其性能好坏直接影响整个接收机系统的工作状态。接收机前端负责接收工作频率范围内的射频信号并对其进行放大、滤波、变频等处理,只有接收机前端性能满足要求、能正常工作,才能为整个接收系统的可靠运行提供保障。随着通信技术的发展,对接收机的要求越来越高,接收机前端正朝着超接收带宽、大瞬时带宽、小型化、可调等方向发展。

本文基于超外差混频技术,进行超宽带大瞬时带宽可调中频接收机前端技术研究,实现了一款1.5 GHz~18 GHz超接收带宽、1 GHz大瞬时带宽且输出中频可调的接收机前端模块,该模块还具有大动态范围和超低接收灵敏度。


本文详细内容请下载:

https://www.chinaaet.com/resource/share/2000006585


作者信息:

杨国明,汪家兴

(贵州航天计量测试技术研究所,贵州 贵阳 550009)


Magazine.Subscription.jpg

此内容为AET网站原创,未经授权禁止转载。